Our business will be closed from 23rd–31st December 2019!

Wall spacers

Consystec has been developing and producing sophisticated and prestigious signs holders made of high-quality V2A stainless steel (exception: EcoLine series) for over 20 years. Consystec has a variety of different wall spacers and decorative head systems for sign fixing that differ in design, function, and technology. The stainless-steel spacers for sign mounting are made from the full material and are therefore extremely robust and durable by nature. Attachments such as grub screws are also made of stainless steel.

ClassicLine

Wall spacers with grub screw and fixed clamping areas

The high-quality sign holders of the Consystec ClassicLine series have been used successfully for many years. The two-piece holder has a clamping bolt, which is fixed with a grub screw in the shaft. Most models of the ClassicLine series have a thread in the shaft at the rear, so that not only screw and dowel mounting but also screwing on a hanger bolt is possible.

 

  • Head diameters from 13 to 25 mm
  • Wall clearances from 15 to 25 mm
  • Fixed clamping ranges from 5 to 20 mm
  • Versions made of brass and V4A stainless steel available
  • Variants as a table display with different installation angles
  • 2 acrylic glass bearings

 

Article in shop Article in catalogue (PDF)

EcoLine

Wall spacers made of stainless steel or aluminum

An exception in the material are the inexpensive, but still high-quality sign holders of the EcoLine series. There are variants of stainless steel, but also of aluminum in different designs and colors. In addition, this series is particularly flexible, since each of 3 variants are offered: left-hand thread, side grub screw and side clamp.

 

  • Head diameters from 13 to 18 mm
  • Wall clearances of 20 and 25 mm
  • Variable clamping range from 1 to 16 mm
  • Available in stainless steel and aluminum (silver, glossy chrome and black)

 

Article in shop Article in catalogue (PDF)

ConFix1

Three-piece wall spacer with left-hand thread

The smart sign holders of the ConFix1 series offer a great advantage with the possibility of pre-assembling the sign material with the holder. The threaded part can already be connected in advance to the shaft through the hole in the sign material.

 

  • Head diameters from 13 to 35 mm
  • Wall clearances of 15 to 20 mm
  • Variable clamping ranges from 4 to 20 mm
  • 2 transparent washers

 

Article in shop Article in catalogue (PDF)

ConFix2

Wall spacer for signs without holes

The timeless shield holders of the ConFix2 series are always used when a sign mounting without holes in the sign material is desired. The two-piece Consystec standoff consists of the core, which is screwed to the wall, and the shaft with clamping rail, which is pushed over and secured with a lateral grub screw.

 

  • Head diameters from 15 to 35 mm
  • Wall clearances of 15 mm
  • Clamping ranges from 1 to 12 mm

 

Article in shop Article in catalogue (PDF)

ConFix3

Wall spacer with left-hand thread

The ConFix3 series adjustable sign holders are very popular for their flexibility and value for money. The two-piece holder has a threaded bolt and a shaft. The sign holder is twice secured by the left-hand thread and a small hole in the side of the head, which allows it to tighten by means of a mandrel tool.

 

  • Head diameters from 13 to 25 mm
  • Wall clearances from 10 to 25 mm
  • Variable clamping ranges from 4 to 26 mm
  • 2 transparent washers

 

Article in shop Article in catalogue (PDF)

ConFix4

Wall spacers in square shape

The square plate holders of the ConFix4 series are attractive and extraordinary. The two-piece sign holder has a left-hand thread and an additional grub screw for securing.

 

  • Edge lengths from 10 to 35 mm
  • Wall clearances of 15 to 20 mm
  • Variable clamping ranges from 4 to 14 mm
  • 2 acrylic glass bearings

 

Article in shop Article in catalogue (PDF)

ConFix5

Wall spacer with ribbed bolt and grub screw

The elegant sing holders of the ConFix5 series have been developed by Consystec to clamp even very thin sign material from 1 mm. The two-part construction consists of a ribbed bolt and the shaft, in which the bolt is secured with a grub screw.

 

  • Head diameters 9 and 13 mm
  • Wall clearances 15 and 20 mm
  • Variable clamping ranges from 1 to 12 mm
  • 2 transparent washers

 

Article in shop Article in catalogue (PDF)

UniversalLine

Wall spacer with thread and grub screw

The UniversalLine series highly flexible sign holders are available in an extraordinary variety of designs. The two-piece holder has a threaded bolt and a shaft. The sign holder is secured twice by a lateral grub screw and a small hole in the side of the head, which allows it to tighten by means of a mandrel tool.

 

  • Head diameters from 13 to 50 mm
  • Wall clearances from 15 to 50 mm
  • Variable clamping ranges from 5 to 20 mm
  • Versions also made of brass
  • 2 transparent washers

 

Article in shop Article in catalogue (PDF)

Countersunk head sign holders

The stylish countersunk head sign holders were designed to be able to fasten sign material flush with a countersunk hole. This optics is possible in particular with glass signs.

 

  • Head diameters from 13 to 38 mm
  • Wall clearances from 16 to 40 mm
  • Clamping ranges from 8 to 12 mm
  • Versions also made of brass
  • 2 black rubber discs

 

Article in shop Article in catalogue (PDF)

ConFix6

Sign clamps 75 mm in length

The Exclusive sign clamps of the ConFix6 series are excellently crafted, thoughtfully designed and have high-quality visible surfaces grinded with grain 320. There is a square and a round optics.

 

  • Clamping range square optics: 8 mm (can be reduced by additional rubber parts)
  • Clamping range round optics: variable from 4 to 8 mm
  • 2 black rubber parts

 

Article in shop Article in catalogue (PDF)

Wall fixtures, ceiling fixtures

The product portfolio of Consystec includes numerous wall fixtures and ceiling fixtures for signs from the FlagLine series. In addition to pre-assembled PremiumFix series labels, Consystec also offers numerous connectors made of high-quality stainless steel to create individual solutions for mounting signs on the wall or under the ceiling.
Hanging signs in conjunction with bar systems or wire rope systems are ideal for signage that should be visible from afar. Related are solutions where the signs are tensioned between floor and ceiling or on the wall with stainless steel wire. In addition to the ready-made variants of the AirLine series, Consystec also offers numerous components to realize individual sign mounting solutions.

 

  • Turned variants made of stainless steel with different drilling distances and clamping areas
  • Different designs, flat or rounded
  • Sign clamps made of stainless-steel injection grinded in different sizes
  • Glass connectors and glass plate supports
  • Double-sided variants for mounting on ropes or rods
  • Rope-clamping systems

 

Article in catalogue (PDF)

Components for sign systems sign holders

As a wholesaler for the advertising industry, Consystec also offers the option of realizing individual solutions on the basis of a large number of suitable components for the MyTube and MyTrack signage systems. This includes a large number of sign clamps, pipe connectors, pipe end caps, plate feet and rail profiles.

 

  • Tube end caps in different diameters and designs made of injection molded stainless steel grinded
  • Stainless steel sign clamps for tube mounting in various designs and sizes
  • Stainless steel tube connectors in different designs and sizes
  • Stainless steel plate holder with back rounded shafts for tube mounting
  • Aluminum rails in stainless steel look and accessories (MyTrack)

 

Article in catalogue (PDF)

Newsletter subscription

Datenschutz: Sämtliche auf der Website von Consystec erhobenen persönlichen Daten werden ausschließlich zur individuellen Betreuung der Übersendung von Produktinformationen oder Unterbreitung von Serviceangeboten gespeichert, verarbeitet und ggf. an Kunden von Consystec weitergegeben. Consystec sichert zu, dass alle Angaben entsprechend den geltenden datenschutzrechtlichen Bestimmungen vertraulich behandelt werden. Das Newsletter Abo kann zu jeder Zeit von Ihnen oder uns ohne Angabe eines Grundes beendet werden. Dazu nutzen Sie bitte den Abmeldelink in den Newslettern oder das Formular auf der Consystec Firmenwebseite.
captcha 
Our website uses cookies
Cookies are necessary for an optimal visualization of our web pages. Some of these cookies are necessary for the functionality of our pages, other cookies enable a comfortable user experience or help us to collect statistics to continuously optimize the web pages.
Please agree to all our cookies for an optimized use of our web pages and note that our page does not function completely for you anymore or can be displayed incorrectly if you reject the cookies.
You can revoke your consent at any time. You can find more information on this and on cookies in general in our Privacy Policy.
Agree
Disagree
Imprint & Privacy Policy